b'Discharging the Various Valve Styles Linked SystemsGas Spring Discharging with TPVF1 Valve Conversion from Autonomous Gas Spring with Charging Port G1/8 to InfoInterconnected Gas Spring Info Withdraw the safety plug. Withdraw the safety plug. Softly screw in discharging tool DV-M6 or DV-G1/8 untilDischarge the gas spring with the gas spring starts to dis- key DV-G1/8, pressing slightly charge.on the valve.Gas Spring Discharging with TPVF2 ValveLoosen the valve using a 3mm Allen key turning right until theB.1B.2Withdraw filling valve TPFV1 gas spring begins to discharge (2-3 turns) (B.1) by unscrewing it with key DV-Once the gas spring has been discharged, place the valve byG1/8.turning it left until it starts to exert pressure on the closing o-ring. The gas spring is ready for charging (B.2).NOTE: once charging is concluded, leave the valve in its initialInstall the appropriate fittings position turning it to the left until it stops. and hoses.READY offers a wide variety of connection fitting options.Gas Spring Discharging with TPVF3 ValveConversion from Autonomous Gas Spring with Charging Port M6 to Stem, to Interconnected Gas SpringWithdraw the M6 safety plug.Withdraw the safety plug, ifLoosen the valve using aOnce the gas spring has been necessary. 3mm Allen key turning rightdischarged, place the valve byDischarge the gas spring with until the gas spring begins toturning it left until it reacheskey DV-M6, pressing slightly discharge (1/2turn). its initial position. Valve ison the valve, and screw the ready for charging. M6 safety plug again.Gas Spring Discharging with TPVF4 Valve Withdraw the G1/8 safety plug.Install the appropriate fittings and hoses.READY Withdraw the safety plug. Softly screw in dischargingoffers a wide variety of tool DV-M6B until the gasconnection fitting options.8 spring start to discharge. 9'