b'M-9019 mm 90 daN Pressure medium Gas Nitrogen (N 2 ) M-18025 mm200 daN Pressure medium Gas Nitrogen (N 2 )Max. charging pressure 175 Bar Max. charging pressure 175 Bar8 Min. charging pressure 25 Bar 12 Min. charging pressure 25 BarRod seal area 0,50 cm 2 M6 Rod seal area 1,13 cm 2Operating temperature 0C - 80C Operating temperature 0C - 80Cmax Force increase by temperature 0,33 %/C max Force increase by temperature 0,33 %/CS Max. stem speed 1,6 m/s S Max. stem speed 1,6 m/sMaintenance kit Kit C19.1 Maintenance kit Kit C2516 10.5PED PED16 1 12014/68/UE ISO 11901 VDI 3003 0.25 2014/68/UE ISO 11901 VDI 30030.25 Lar 1 V D I S A F E T YLa 19 V D I S A F E T Y LoColor code Lc Lo RE-8-19 Color code Lc RE-12-25r 0.8r 0.8 Maximum strokes / minute (at 20C) r 1 Maximum strokes / minute (at 20C)100 5 1405 94 11786 120 10780 79 9975 100 9460 60 80 91 750.1 Strokes/min (spm)0.3 Strokes/min (spm)48 40 60602540 34 29 24 40 50 43 36 30 2520Gas charging M6(8mm) 20 Gas charging M6(5.5mm) 20 20TPFV3 valve TPFV3 valveM6-C adapter 0 71015 25 38 50 63 80 100 125 M6-C adapter 0 7 1316 25 38 50 63 80 100 125 160100 13 Stroke (mm) 10 15 Stroke (mm)9480 86 79 1401,35 1,50 11775 1201,30 Fo Fc P Smax Lo Lc V 99 Fo Fc PSmax Lo Lc V Color code 60 1,45 107 94Color code60 MODEL Kg 100Strokes/min (spm) Force (daN)MODEL Kg 1,25 48 daN daN Bar 1,40 91 daN daN Bar40 mm mm mm l 1,35mm mm mm l 1,20 34 80 75Strokes/min (spm)40 1,30Force (daN)GRN (Green) 30 (5%)38 60 GRN (Green) 50 (5)71 45M Series 1,15 29 24M-180x7 7 56 49 0,004 0,13 1,25 60 M Series60 M-90x77 56 49 0,002 0,08 BLU (Blue) 50 (5%)65 100 BLU (Blue) 100 (10)143 9020 1,20 5020M 180x10 10 62 52 0,005 0,14 40 43 36RED (Red) 70 (5%)90 140 RED (Red) 150 (15)214 25 1351,10 1,15 M-90x1010 62 52 0,003 0,08 1,05 1,10 30 20YEL (Yellow) 90 (5%)112 175M-180x13 13 67,4 54,7 0,006 0,14 YEL (Yellow) 200 (20)277 1750 Maximum recommended 90% stroke 20 M-90x1313 67,4 54,4 0,003 0,08 (Other forces) 25 38 13 - 90 6316 - 112 100 25 - 175M-180x15 15 72 57 0,006 0,15 1,05 28 - 200 Maximum recommended 90% stroke1,00 71015 50 80 100 1250 710 13 25 38 50 63 80 125 (Other forces)40 - 277 25 - 17515 1,0013 Stroke (mm) 0 0 7 1316 25 38 50 63 80 100 125 160 M-90x1515 72 57 0,004 0,09 Stroke (mm)M-180x16 16 74,3 58,3 0,007 0,15 7 10 1316 25 38 50 63 80 100 125 16015 Stroke (mm)The black color code denotes a different pressure from that which the customerThe black color code denotes a different pressure from that which the customer 10 15 Stroke (mm) M-90x2525 92 67 0,006 0,10 could choose when ordering between the minimum charging pressure (25Bar) and M-180x25 25 92 67 0,010 0,16 could choose when ordering between the minimum charging pressure (25Bar) and 1,35 140100 94 100M-180x38 38 118 80 0,014 0,19 the maximum charging pressure (175Bar). If not otherwise specified, the gas spring the maximum charging pressure (175Bar). If not otherwise specified, the gas springM-90x3886 38 118 80 0,008 0,12 1,30 120 117 25090 1,5080 79 will be supplied in the yellow code version.M-180x50 50 142 92 0,019 0,21 will be supplied in the yellow code version.107 M-90x5075 50 142 92 0,011 0,13 80 100 99 94 2001,25 1,4570M-180x63 91 63 172 109 0,022 0,25 1,4060 60 How to order 1,35 M-90x6360 63 168 105 0,013 0,15 1,20 80 75 150 How to orderStrokes/min (spm) Strokes/min (spm)Force (daN) Force (daN)48 50M-180x80 80 205 125 0,028 0,26 1,30Force (daN) Force (daN) M-90x80 80 40 202 34 122 0,016 0,16 1,15 M-90x125 YELM-180x100 60 50 43 245 145 0,035 0,29 100 M-180 x 50 BLU40 40 60 100 1,2529 30 M-90x100100 245 145 0,021 0,18 1,10M-180x125 125 29536 170 0,046 0,33 1,2024 20 40 30 25 1,1520 5020 1,05 2010 20 M-90x125 125 295 170 0,026 0,21 0 Model Stroke Color codeM-180x160 160 373 213 0,063 0,33 1,10 Model Stroke Color codeMaximum recommended 90% stroke01,00 25 50 75 100 125 150 175 1,050 0 71015 25 38 50 63 80 100 125 0 25 50 75 100 Maximum recommended 90% strokePressure (Bar) 1,00 125 150 17571015 25 38 50 63 80 100 125 13 Stroke (mm) 7 1316 25 38 50 63 80 100 125 160 0 7 1316 25 38 50 63 80 100 Pressure (Bar) 16012513 Stroke (mm) 10 15 Stroke (mm) 1015 Stroke (mm)Force/stroke ratio Initial force/charging pressure ratio Force/stroke ratio Initial force/charging pressure ratio1,35 100 1,50 2501,30 90 1,4580 1,40 2001,25 70 1,351,20 60 1,30 150Force (daN) Force (daN)Force (daN)Force (daN)1,15 50 1,2540 1,20 1001,10 30 1,151,05 20 1,10 5010 Maximum recommended 90% strokeMaximum recommended 90% stroke 1,051,00 0 71015 25 38 50 63 80 100 125 0 1,00 025 50 75 100 125 150 175 0 7 1316 25 38 50 63 80 100 125 160 25 50 75 100 125 150 17513 Stroke (mm) Pressure (Bar) 1015 Stroke (mm) Pressure (Bar)100 Assembly possibilities 250 Assembly possibilities90 20,580 20070 15021,5 16 21.5602/3 Lc min2/3 Lc minForce (daN) Force (daN)5040 1003020 +1.0 50 +1.010 19,2+0.5 FS 19FS 19/2 FS 19/1 FS 19FS 19/2 25 +0.5 FS 25FS 25/2 FS 25FS 25/270 0 25 50 75 100 125 150 175 0 25 50 75 100 125 150 175 71Product improvement through research and development is an ongoing process. All specifications are subject to change without notice. Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.Pressure (Bar) Pressure (Bar)'