b'M-4212 mm 42 daN Pressure medium Gas Nitrogen (N 2 ) M-5014 mm 50 daN Pressure medium Gas Nitrogen (N 2 )Max. charging pressure 150 Bar Max. charging pressure 175 Bar6 Min. charging pressure 20 Bar 6 Min. charging pressure 50 BarRod seal area 0,28 cm 2 Rod seal area 0,28 cm 2Operating temperature 0C - 80C Operating temperature 0C - 80Cmax Force increase by temperature 0,33 %/C S max Force increase by temperature 0,33 %/CS Lc Max. stem speed 0,5 m/s Lc Max. stem speed 0,5 m/sMaintenance kit Kit C12 Maintenance kit Kit C14PED 16.5 1 PED0.50.25 2014/68/UE 0.25 2014/68/UELa V D I S A F E T Y Lo La V D I S A F E T YLoRE-6-12 r 0.6 Color code RE-6-14Maximum strokes / minute (at 20C) Maximum strokes / minute (at 20C)70 606360 57 50 5053+0.1 -0 Strokes/min (spm) Strokes/min (spm)50 50 40 404540 40 30 32 27Gas charging M6(5mm) Gas charging M6(8mm)TPFV4 valve 32 TPFV3 valve 23 19M6-C adapter 30 27 M6-C adapter +0.1 -0 2012.214.22320 107 101315 19 25 38 50 63 15 25 38 50 63 80Stroke (mm) Stroke (mm)1,60 6070 1,351,50 63 50 50Smax Lo Lc V Color code Fo Fc P Smax Lo Lc V 1,30 Fo Fc P60 57 Color codeMODEL Kg 1,40 53 daN daN Bar MODEL Kg 1,25 40 daN daN BarStrokes/min (spm)mm mm mm l GRN (Green) 50 13 (5%)20 45 mm mm mm l 40 20 (5%)25 70 M SeriesForce (daN)Force (daN)Strokes/min (spm)1,30 1,20M Series 50 45 GRN (Green) 3230 271,20 1,15BLU (Blue) 25 (5%)40 90 BLU (Blue) 30 (5%)40 110M-42x7 7 56 49 0,001 0,03 40 4060 135M-50x15 15 72 57 0,002 0,06 1,10 40 (5%) 23 19 142RED (Red) 38 (5%) RED (Red)501,10 20M-42x10 10 62 52 0,001 0,03 YEL (Yellow) 42 (5%) 3265 27 50 150 63M-50x25 25 92 67 0,003 0,08 YEL (Yellow) 50 (5%)65 175Maximum recommended 90% stroke 1,0530 Maximum recommended 90% stroke1,00M-42x13 13 68 55 0,001 0,03 20 0 7 10 1315 19 25 38 Stroke (mm) 23M-50x38 38 118 80 0,005 0,09 1,00 0 15 25 25 38 50 50 63 80 80(Other forces) 6 - 4210 - 65 20 - 150 (Other forces) 15 14 - 50 3820 - 65 63 50 - 17510Stroke (mm)7 101315 19 25 38 50 63 Stroke (mm)The black color code denotes a different pressure from that which the customer M-42x15 15 72 57 0,001 0,04 50 Stroke (mm)M-50x50 50 142 92 0,006 0,10 The black color code denotes a different pressure from that which the customer could 70 could choose when ordering between the minimum charging pressure (20Bar)60 choose when ordering between the minimum charging pressure (50Bar) and the 55M-42x19 63 19 80 61 0,001 0,05 and the maximum charging pressure (150Bar). If not otherwise specified, the gas M-50x63 50 63 169 106 0,007 0,12 maximum charging pressure (175Bar). If not otherwise specified, the gas spring will be 1,60 1,35 504050 4560 spring will be supplied in the yellow code version. supplied in the yellow code version.1,30M-42x25 57 53 25 92 67 0,002 0,05 1,50M-50x80 80 40 205 125 0,009 0,15 1,25 4030Force (daN)1,40 How to order 40 35Force (daN) Strokes/min (spm) Force (daN)Force (daN)50 How to orderM-42x38 50 38 118 80 0,003 0,06 20 32 1,20 30Strokes/min (spm)45 1,30 M-42 x 7 YEL 30 27 1,15 25M-42x50 50 40 142 92 0,004 0,06 10 23 20 M-50 x 15 YEL401,20 1,10 15M-42x63 63 172 109 0,005 0,07 1,10 0 2025 Model Stroke 100 Color code 150 20 19 1,05 10 50 75 100 125 150 1753230 50 75 12527 Pressure (Bar) Model Stroke Color codeMaximum recommended 90% stroke23 Maximum recommended 90% stroke 10 Pressure (Bar)1,00 15 25 38 50 63 80 1,0020 50 7 10 1315 19 25 38 50 63 0 15 25 38 50 63 807 101315 19 25 38 50 63 0 Stroke (mm)Stroke (mm) Stroke (mm) Stroke (mm)Force/stroke ratio 40 Initial force/charging pressure ratio Force/stroke ratio Initial force/charging pressure ratio1,60 50 1,35 5530 1,30 50Force (daN)1,50 4020 1,25 451,40 30 40Force (daN) Force (daN)10 1,20 35Force (daN) Force (daN)1,3020 1,15 301,20 0 2025 50 75 100 125 150 1,10 2510 Pressure (Bar) 201,10 1,05Maximum recommended 90% stroke Maximum recommended 90% stroke 151,00 0 7 10 1315 19 25 38 50 63 0 2025 50 75 100 125 150 1,00 0 15 25 38 50 63 80 10 50 75 100 125 150 175Stroke (mm) Pressure (Bar) Stroke (mm) Pressure (Bar)50 50 55Assembly possibilities Assembly possibilities40 40 504530 30 40Force (daN) Force (daN)n 35 n20 2/3 Lc mi 20 Force (daN) 30 2/3 Lc mi+1.0 10 25 +1.010 +0.5 20 +0.512.2 15 14. 268 0 2025 50 75 100 125 150 0 2025 50 75 100 125 150 10 50 75 100 125 150 175 69Pressure (Bar)Product improvement through research and development is an ongoing process. All specifications are subject to change without notice. Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.Pressure (Bar) Pressure (Bar)504030Force (daN)20100 2025 50 75 100 125 150Pressure (Bar)'