b'PE-50038mm 470 daN Pressure medium Gas Nitrogen (N 2 ) PE-75045 mm 740 daN Pressure medium Gas Nitrogen (N 2 )Max. charging pressure 150 Bar Max. charging pressure 150 BarISO 20 Min. charging pressure 35 Bar ECO 25 Gas charging M6 Min. charging pressure 35 BarPOWER Rod seal area 3,14 cm 2 SERIES TPFV3 valve Rod seal area 4,91 cm 2M6 Operating temperature 0C - 80C M6-A adapter Operating temperature 0C - 80Cmax Force increase by temperature 0,33 %/C Smax Force increase by temperature 0,33 %/CS Max. stem speed 1,6 m/s Max. stem speed 1,6 m/s10.5 Maintenance kit Kit SP500.1 14.5 Maintenance kit Kit KS7502 0.25 PED 1 0.25 PED2014/68/UE 2014/68/UEr 1 Lo La r 1 Lo LaLc V D I S A F E T Y Lc V D I S A F E T Y3.4 RE-20-32 4 RE-25-35Linked port G1/8Gas charging M6TPFV4 valveM6-C adapter 33 Maximum strokes / minute (at 20C) Maximum strokes / minute (at 20C)4 90 86 39 100480 79 90 9270 73 80 8045 6060 70 700.1 Strokes/min (spm) 50 48 20 0.3 Strokes/min (spm) 60 5618 40 40 45 50 473830 34 29 24 40 40 332520 20 30 284xM6(10mm) 2xM8(12mm) 2310 1016 25 38 50 63 80 100 125 20 12,719 25 38 50 63 80 100 12512,7 Stroke (mm) Stroke (mm)PE Series 90 86 100 92 PE Series700 130090% 79 100% 90% 100%90Smax Lo Lc Fo 80 F 73 Fc P V Smax Lo Lc Fo 1200 F 80 Fc P VMODEL 650 60 Kg MODEL 80 70 Kg70mm mm mm daN 60 daN daN Bar l mm mm mm daN 1100 daN 56 daN Bar l70Force (daN) Strokes/min (spm) Force (daN)600Strokes/min (spm)6050 48 100040 50 47 PE-500x1010 70 60 550 545 555 34 29 0,021 0,43PE-750x13 12,7 75,4 62,7 900 1225 40 33 0,016 0,6040 40 115030 24 800 PE-500x1312,7 75,4 62,7 500 565 575 0,022 0,44PE-750x19 19 88 69 30 1170 1250 28 0,023 23 0,6520 20 Maximum recommended 90% strokeMaximum recommended 90% stroke 700 PE-500x1616 82 66 450 570 10 16 16 25 25 38 585 50 50 63 63 80 80 100 0,026 0,46PE-7500x25 25 100 75 20 1170 12,719 25 1250 50 63 63 80 80 100 100 125 0,7010 10 38 100 125 12,719 25 38 50 Stroke (mm) 0,030 1250 12,7 Stroke (mm) 125 0 38 Stroke (mm) PE-500x25 25 100 75 590 12,7 610 Stroke (mm) 0,035 0,51PE-750x38 38 126 88 1170 1250 0,045 0,8090 86 550 100 740 5% 1300 150 PE-500x3879 73 38 126 88 470 5% 610 635 150 0,047 0,59PE-750x50 92 50 150 100 1170 1250 0,060 0,888008070 450 700 90 80 (20C) 1200 (20C) PE-500x5060 50 150 100 (20C) 625 645(20C) 0,058 0,66PE-750x63 63 177 114 700 1255 0,075 0,98650 80 70 117060060 350 70 1100 PE-500x6363 177 114 630 655 0,070 0,73PE-750x80 56 80 210 130 1170 1255 0,095 1,10Force (daN) Strokes/min (spm) Force (daN)Strokes/min (spm) Force (daN)50050 48 600 60 1000400Force (daN) PE-500x8080 40 34 210 29 130 250 640 665 0,086 0,83PE-750x100 100 40 250 150 1170 1255 0,119 1,2440 50 47 30090030 550 40 PE-500x100100 250 24 150 20 150 645 675 0,105 0,96PE-750x125 125 300 28 175 200 1255 0,149 1,3720 30 33 1170800100500 23 PE-500x125125 300 175 50 650 35 50 680 75 100 125 0,128 1,05 20 700 0 12,719 25 50 50 75 63 Maximum recommended 90% stroke10 150 0 35 38 100 80 125 100 150 1251016 25 38 50 63 80 100 125 Maximum recommended 90% stroke 12,719 25 38 50 63 80 100 125450 0 10 16 25 38 50 63 Pressure (Bar) 125 Stroke (mm) Pressure (Bar)12,7 Stroke (mm) 80 100 Stroke (mm)12,7 Stroke (mm)Force/stroke ratio Initial force/charging pressure ratio Force/stroke ratio Initial force/charging pressure ratio700 550 1300 800650 450 1200 7001100 600600 350 500Force (daN) Force (daN)Force (daN) Force (daN)1000 400550 250 900 300200500 150 800 100Maximum recommended 90% stroke 700 Maximum recommended 90% stroke 0450 0 10 16 25 38 50 63 80 100 125 50 35 50 75 100 125 150 0 12,719 25 38 50 63 80 100 125 35 50 75 100 125 15012,7 Stroke (mm) Pressure (Bar) Stroke (mm) Pressure (Bar)550 Assembly possibilities 800 Assembly possibilities450 700600350 17 22n 500 22Force (daN) 2/3 Lc mi nForce (daN) 2/3 Lc mi250 400300150 +1.0 20038 +0.5 100 +1.050 35 50 75 100 125 150 FS 38FSC 38 FP 38FPR 38 FI 38FI 38/1 0 45+0.5 FS 45FSC 45 FP 45FPR 45 FRS 45 FB 45 FI 45FI 45/135 50 75 100 125 150 64 Pressure (Bar) Pressure (Bar) 65Product improvement through research and development is an ongoing process. All specifications are subject to change without notice. Product improvement through research and development is an ongoing process. All specifications are subject to change without notice.'