b'HYDROCAMREADYAccessories HYDROCAMAccessoriesControl Panel-MODEL RT-2175-CP 28.7 31.2READY Technology recommends the use of a controlpanel with all nitrogen return systems for each H-1 18.0 22pump. Use at least one control panel per system. This 4.5 4.5NAAMS control panel is designed for remote mounting 4.5 4.5and is used to monitor or adjust nitrogen pressure in theH-2 unit. The panel is also equipped with a rupture plug G 7/16 - 20 9/16-18 G 7/16 - 20 7/16-20for added safety. Each control panel includes the neces- 16 14sary hose and straight connectors to connect one H-2 unit. O-ring Male Straight Connector G-1/8 Male Straight ConnectorO-ring face connectors can also be supplied upon request. READY Part # RT4F5OLO-S READY Part # RT4F5OX-SBottom View Front View Side ViewSuggested drilling pattern for customer tomount the NAAMS standard control panel.Junction BlockFor Self-Contained SystemsTo fill or recharge nitrogen gasquickly and easily, order the quickdisconnects:Part #RT-QDM-6251-A* Part #RT-QDM-6-AACCUMULATOR JUNCTION BLOCK (H2-2 model only)Model A B C D E F G H I JHR-6 model shown above mm 38 9 22 29 73 9 55 25 36.5 22* O-ring face connectors can HR-2 inch 1.50 0.35 0.87 1.14 2.87 0.35 2.17 0.98 1.44 0.87also be supplied upon request.mm 38 9 22 29 131 37 57 25 65.5 22HR-4 inch1.50 0.35 0.87 1.14 5.16 1.46 2.24 0.98 2.58 0.87mm 38 9 22 29 187 37 114 25 93.5 22HR-6 inch1.50 0.35 0.87 1.14 7.36 1.46 4.49 0.98 3.68 0.8716'