b' READY METRICREADY Benders - Metric: in stock lengthsBenders304.8, 609.6, and some styles 914.4 mm longDesigned so you can segment to shorter custom lengths. Length Segmenting: Minimum segment size is the Gib Length (GL). Custom lengths available, specify. 1. 304.8 mm lengths are shown(left). 609.6 and 914.4 mm lengthsRBM 62:304.8& 609.6 mm lengths in stock,15.88 mm diameter rocker are a repeating pattern of the304.8 mm length.2. Minimum segmenting size is theGL (gib length) dimension. Eachsegment needs a gib to retainrocker. Spring returns are markedby and are under gibs.How to Segment:1. Remove rocker by taking out setX = 304.8mm, repeat for 609.6 mm lengths Gib(GL) =28.6 mm screw/lube tting. Rotate rocker toremove the spring return plungermechanism and rocker.RBM 100:304.8& 609.6 mm lengths in stock,25.4 mm diameter rocker 2. Rocker is fully hardened (Rc 56-62). Cut with wire machine or bestway to precise length/size.3. Saddle is machinable. Cut withwire machine or best way to pre-cise length.4. CAUTION: Thoroughly de-burrand clean saddle and rocker. Makesure no chips or dirt remain insaddle/rocker spring return pocketsX = 304.8mm, repeat for 609.6 mm lengths Gib (GL) = 38.1 mm before reassembly.5. Reassemble and check to makeRBM 150: 304.8, 609.6 and 914.4 mm lengths in stock,38.1 mm diameter rocker sure rocker returns easily whenrotated.READY Can Segment:1. You must purchase the entire304.8, 609.6 or 914.4 mm lengthand specify the segment dimen-sions. The remaining pieces areshipped with the tooling unlessspecied otherwise. No rebates onunused pieces.2. For precision cuts, call READY forX = 304.8mm, repeat for 609.6 and 914.4 mm lengths Gib (GL) = 50.8 mm pricing - 1-800-543-4355.RBM 200, 250 and 300:304.8, 609.6 and 914.4 mm lengths in stock,50.8, 63.5 and 76.2 mm dia rockers Order Example:RBM 100X = 609.6mm READY RockerSpecifyModelDiameter LengthCallout 25.4 mmof Bender609.6 mm= spring returnGL = gib lengthRBM 200 Gib (GL) =63.5 mm Flush mount lube ttings at end of spring return. 64 mm X = 304.8mm, repeat for 609.6 and 914.4 mm lengths RBM 250 Gib (GL) =76.2mm77mmRBM 300 Gib (GL) =89 mm1588.9 mm'