b'RTCH SeriesThe length of the hose should haveMake sure the hose is not twisted duringSelect the appropriate fittings so that a certain amount of slack (10 or 20%the installation process. the hoses are not forced. A proper use excess) of fittings prevents excessive hose lengthBefore starting a curvature, a minimumExternal mechanical influence on the hose The installation process must complystraight length must be respected to avoidshould be avoided, even the rubbing against with the minimum hose curvature radius. damage to the joint. a nearby element. It is recommendable to use clamps for this process.A A THRUST KEYTo avoid accidents or serious damageThe working gas spring should be to the pressure accumulator, the presscompletely perpendicular to the working ram should have the necessary adequatesurfacedimensions.Global Supplier of Quality Die Components for 45+ Years.READY can be your single source from manufacturing dies to supplying all your die component needs.For more info, call 800-543-4355 today! READY TECHNOLOGY, INC.333 Progress Road.Dayton, OH 45449(800) 543-4355.(937) 866-7200.FAX: (937) 866-7226www.readytechnology.comCatalog No. 10172017 10 READY Hydraulic Cams Brochure w 3 Updated pages.indd 12 10/9/17 10:09 PM'